Find a product
90φVT
- screw mouth
- Tack dedicated screw
- Molding/layer (material)
- Multilayer (PE, EVOH)
- Inner diameter (Φ)
- 22.7
- Shoulder length guide (mm)
- 250～340
- Approximate volume (ml)
- 1,000～2,000
- remarks
- ■ Tuck tube ■
● Maximum capacity: 2,000 ml, inner diameter: 22.7 φ, suitable for large-volume filling, mainly for industrial use.
This is a tube that is used as a
● Unlike extrusion tubes, we use soft sheet-like fabric, so it is
It is easy to squeeze out the contents later.
● The minimum lot size varies depending on the specifications. Please contact us for details.
Please adjust accordingly.
* Tack tubes can only be filled from the opening of the tube.
*Offset printing only (silk printing and hot stamping are not available)
* High barrier type: Multi-layered tube in the shoulder section as well as the body section.
*Please note that the content volume will vary depending on the specific gravity of the filling.
(Please check the filling amount test and contents resistance test.)
Applicable Cap
No.14 (flat)
No. New 14 (Hei)
No.25 (flat)
No.12 (need to cut tip)
No.5-15 set (tip must be cut)
No.6-16 set (hole diameter: 5φ)
No.13-17 set (tip must be cut)
No.29 set (hole diameter: 14φ)
Suitable stopper
R inner plug (for tack)
